Our central dialysis reverse osmosis water systems purified water is in compliance with registered enterprise product standards, USA AAM/ASIO standard and YY0572-2015 Standard. System design strictly compliance with YY0793-2010 standard .
It can be used with dialysis machines such as Fresenius, Braun, Campbell, Baxter, Toray, Nikkiso, Nipro, Belk, and Jihua.
System Features
● Removal rate of endotoxin and bacteria ≥99%
● Dissolved salt removal rate ≥97%
● The water recovery rate is more than 70%
● System emptying rate ≥99%, no dead space
Models for central dialysis reverse osmosis systems
Model |
Capacity |
Feed for dialysis machine |
Moldialysis50D |
50LPH |
1set |
Moldialysis250D |
250LPH |
3-4sets |
Moldialysis500D |
500LPH |
5-10sets |
Moldialysis750D |
750LPH |
11-15sets |
Moldialysis1000D |
1000LPH |
15-20sets |
Advantages
1. Fully automatic control , failure indicator and onsite alarm.
2. Built-in automatic water circulation program to maintain water quality.
3. Built-in timing flushing program, RO membrane anti-scaling program, and RO membrane flushing function.
4. The touch screen has a process picture, and each water pump, switch, and liquid level has a dynamic monitoring picture.
5. The system has automatic protection functions, such as water stop, power failure, overload, high and low voltage automatic protection to ensure equipment safety.
Photos of 3000LPH dialysis reverse osmosis water systems
Photo of 500LPH dialysis reverse osmosis water system
FAQ
Fault content |
Problems |
Solutions |
Produced water conductivity over standard |
RO membrane fouling |
Replace RO membrane |
Raw water ion content high |
Test the raw water and produced water conductivity |
|
Produce water conductivity meter failure |
Replace or maintance the produce water conductivity meter |
|
Concentrated water discharge valve failure |
Replace or maintance the concentrated water discharge valve |
|
Low production water flow |
RO membrane fouling |
Replace ro membrane |
Low Raw water temperature |
Increase inlet water temperature,15-25℃ |
|
Low Running pressure |
Increase running pressure, less than 200bar |
|
Low ambient temperature |
Increase the temp around 20℃ |
http://www.mole-water.com/